Customization: | Available |
---|---|
Type: | Volumetric Filling Machine |
Automatic Grade: | Semi-Automatic |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
25kg 50kg protein Powder Weighing Filling Sealing Machine
For the fine powder products, The powder will be easy to fly out cause some dust during the packaging process, if so the dust will make our workshop dirty and it will influence the packing performance. What is the reason for the "dust fly"
The first is that the powder is too fine. Secondly, the distance between the discharge opening and the bottom of the bag. During the blanking process, the material will slide into the bag using the packaging material as a "slide". If the powder rises, it will pollute Sealing, so that the seal cannot be sealed well , and the quality of the product may be affected.
Regard, the 25 kg big bag packaging machine produced by our company can effectively reduce the phenomenon of powder fly out. This equipment has two main characteristics: the equipment can be filled twice, The machine can hold the bag , equipment can drive the bag up and down. Working principle: After clamping the bag, raise the bag so that the filling head reaches the bottom of the bag, and the equipment starts the first filling. When the first filling is finished, the bag go down to keep the good distance with the bag bottom. and the equipment does the second filling. The weight of the secondary filling is generally relatively small, on the one hand, it is to maintain the accuracy of the filling, on the other hand, it greatly reduces the phenomenon of dust fly .
Main Feature:
1 The Filling weight Can Save on the Touch screen
2 Machine controlled by Touch screen
3 The equipment Has two times filling : fast filling and slow filling= Two steps weigh-fill : fast speed fill is for bulk fill ,The slow speed is for top-up fill.Fast Filling can keep the machine capacity is higher than normal machine. the slow filling can keep the high accuracy.
4 The Pneumatic clamp and lifting system installed on the weighting sensor to Control the fast filling and slow filling .Pneumatic Clamp is for Control the bags. One Clamp is for one bag sizeThe lifting system can avoid the dust fly
5 The servo motor control the Filling and AugerThe Servo machine can keep good accuracy
6 Combined Hopper or split Hopper for easy cleaning The split Hopper is better for the cleaning
7 The Hand-wheel can adjust the height of the Filling head . it is suitable for different bag length
8 The Full stainless steel Cover the Motor on the filling head. it can stop the metal pollution and clean.
9 The Filling weight can be adjustable (filling by weight ). One machine can make different filling weight by changeover the dosing device.
Model |
DH-B5-20L |
DH-B5-60L |
Packing weight |
100G-10KG |
1kg-30kg |
Packing accuracy |
100-1000g ≤ ± 2g Over 1000g ≤ ±0.1-.02% |
1-20kg ≤±0.1-0.2% Over 20kg ≤ ± 0.05-0.1% |
Filling speed |
5-12 times per min |
2-8 times per min |
Power supply |
3P AC208-415V 50/60hz |
3P AC208-415V 50/60hz
|
Total power |
2.65kw |
3.12kw |
Air supply |
6kg/cm² 0.1m³/min |
6kg/cm² 0.1m³/min
|
Total weight |
350kg |
500kg |
Overall size |
1135*890*2500 |
1125*975*3230mm |
Hopper Volume |
56L |
100L |
Specifications: